Design, supply, installation, commissioning and maintenance service for measurement systems at industrial enterprises across Kazakhstan.
Siemens partnerAutomation equipment and measuring instruments
Bestowin representativeHeated tube bundles for instrumentation and analyzersWe carry out the complete cycle of work on measurement systems or individual stages — for example, equipment supply only, or installation and commissioning only. The scope of work and timelines are set out in the commercial proposal.
We design industrial gas analysis and I&C systems for the specific production task, taking into account the process, the measured medium and site conditions.
We supply equipment and components to an agreed specification — based on our own design or the customer's documentation.
We install and connect the equipment, check the measurement channels and bring the system into normal operation.
We keep systems in working order throughout their service life and modify them as requirements change.
We work with systems that continuously measure gas composition and process parameters.
Industrial gas analyzers for process control, gas detection and emissions monitoring.
A process gas chromatograph automatically determines the composition of gas and liquid streams directly at the process unit — in cycles of a few minutes, with no samples taken to the laboratory. The results are transmitted to the control system and used for process control.
Instrumentation and control for process facilities — from the primary sensor to integration with the control system.
Bestowin representative: ready-made insulated tube bundles with electric or steam tracing for impulse lines and sample transport lines.
Delanic is an engineering company based in Pavlodar specializing in industrial gas analysis, process chromatography and I&C systems. Industrial enterprises need these systems to maintain process conditions, control product quality and monitor emissions.
We build industrial gas analysis, process chromatography and I&C systems tailored to the needs of each specific plant and put them into operation. The result for the plant is continuous data on gas composition and process parameters.
We supply Siemens automation equipment and measuring instruments and integrate them into I&C systems at customer sites.
Factory-assembled impulse lines and sample transport lines with electric or steam tracing.
More about impulse linesBestowin representative
Bestowin is a Belgian manufacturer of tube bundles for instrumentation and analyzer applications. Tubing, heating, insulation and protective jacket are supplied as a single factory-made assembly: on site, the bundle is unrolled, cut to length and fitted with end terminations, and the heating is connected.
Selecting a line requires data on the medium, process temperature, minimum ambient temperature on site and route length. The heat-loss calculation is performed by the manufacturer.
Gas analysis equipment, process gas chromatographs and heated lines are used wherever gas composition and process parameters must be monitored continuously.
Online chromatography of process and product streams, sulfur compound analysis, heated sample lines, flare monitoring.
Process gas and product composition, emissions monitoring, I&C for process units.
CHP plants, thermal power plants and boiler plants: combustion control, emissions monitoring, I&C for boiler and turbine equipment.
Gas composition and calorific value at metering skids and gas metering stations, dew point monitoring, heat tracing of impulse lines at outdoor sites.
Gas analyzers and heated sample lines for automated emission monitoring at Category I facilities, as required by the Environmental Code of the Republic of Kazakhstan.
Brief guides to gas composition measurement and impulse line heating at industrial facilities.
The Environmental Code of the Republic of Kazakhstan requires operators of Category I facilities to equip their main stationary emission sources with an automated emission monitoring system (CEMS). The data are transmitted in real time to the National Data Bank on the State of the Environment and Natural Resources of the Republic of Kazakhstan. The system typically comprises continuous gas analyzers, a sampling and sample conditioning system, a heated sample line and flue gas parameter sensors. CEMS measuring instruments must be type-approved and verified. Equipment selection requires a list of emission sources, the substances to be monitored and the sampling conditions.
Laboratory analysis delivers results with a delay: the sample has to be taken, delivered to the lab and analyzed. A process gas chromatograph is installed directly at the process facility, takes samples automatically and determines the composition in cycles of a few minutes. The results are transmitted to the control system and used to run the process, monitor product quality and meter gas — at metering stations, the chromatograph determines calorific value and density. The reliability of the analysis depends largely on sampling: transport lag and condensation in the sample transport line distort the composition, so the line is selected together with the analyzer.
At sub-zero temperatures, the medium or condensate in the impulse lines of pressure and flow transmitters can freeze: the instrument gives a false reading and the line may be damaged. To prevent this, the line is heat-traced with a heating cable or steam tracer and thermally insulated. Factory-assembled tube bundles, such as Bestowin, come with integrated heating, insulation and a protective jacket: on site they are unrolled, cut to length and connected. Line selection requires data on the medium, process temperature, minimum ambient temperature on site and route length; the heat-loss calculation is performed by the manufacturer.
Yes. The scope and frequency of work — scheduled maintenance, diagnostics, troubleshooting — are agreed for the specific system and set out in the contract.
A data sheet, technical specification or equipment list. If you have no documents, describe the task: measured parameters, medium, ranges and installation conditions. We will help define the requirements at the engineering stage.
Yes, we consider such projects. Send us the equipment list and a description of the site, and we will assess the scope of work and prepare a proposal.
Yes. We carry out supply, installation and commissioning both to our own documentation and to designs developed by other companies.
For Category I facilities, yes: the Environmental Code of the Republic of Kazakhstan requires automated emission monitoring at the main stationary sources. We select gas analyzers and heated sample lines and carry out installation and commissioning.
Our office is in Pavlodar. Work at sites in other regions of Kazakhstan is possible by arrangement.
Lead times depend on the type of equipment, its availability from the manufacturer and the scope of work on site. Specific lead times are stated in the commercial proposal.
For a consultation, call us or message us on WhatsApp. Requests from the website are sent via WhatsApp; please send data sheets, technical specifications or equipment lists to info@delanic.kz.
